BGP
Traffic Type Response Integration
Prior to creating a BGP plugin, you will need to configure at least 1 device with a unicast BGP neighbor.
Prerequisites
Before configuring the BGP Response Integration in Netography, you will need to add a BGP unicast neighbor. Refer to vendor specific documentation and the product you are using for configuration. Below are example links to different vendor BGP configuration documentation:
Netography Portal Steps
Navigate to Integrations (make sure you are on the Response tab) and click "Add Integration", then select BGP
Configuration
The following fields are specific to the BGP integration.
| Field | Required | Description | Examples |
|---|---|---|---|
Next Hop | yes | 12.12.12.12 | |
Neighbors | yes | IPv4/v6 unicast BGP neighbors configured in the Netography Portal. | |
Communities | yes | One or many BGP communities. | 3232:32 |
Local Preference | yes | Used to choose the exit path for an autonomous system. Default 100 | 100 |
Factors | yes | srcip | |
Expiration | Number of seconds the blocklist will remain active | 3600 | |
Max | Limit on number of blocks | 1000 | |
Allow List | One or many Allow Lists configured in the Netography Portal, or a List of IP or IP/CIDR addresses | ||
Aggregate | Aggregate IP addresses by mask length |
Updated 9 months ago