Flowspec
🚧Prior to creating a Flowspec plugin, you will need to configure at least 1 device with a unicast BGP neighbor.
Prerequisites
Different vendors and products may have their unique documentation and prerequisites for this setup. Below are example links to configure devices with a unicast BGP neighbor:
Netography Portal Steps
In Settings > Response Integrations, click Add Integration. Select Flowspec`
Configuration
The following fields are specific to the Flowspec integration.
Neighbors
yes
IPv4/v6 unicast BGP neighbors configured in the Netography Portal.
Local Preference
yes
Used to choose the exit path for an autonomous system. Default 100
100
Factors
yes
srcip
Expiration
Number of seconds the blocklist will remain active
3600
Max
Limit on number of blocks
1000
Allow List
One or many Allow Lists configured in the Netography Portal, or a List of IP or IP/CIDR addresses
Aggregate
Aggregate IP addresses by mask length
Last updated