BGP
🚧Prior to creating a BGP plugin, you will need to configure at least 1 device with a unicast BGP neighbor.
Prerequisites
Before configuring the BGP Response Integration in Netography, you will need to add a BGP unicast neighbor. Refer to vendor specific documentation and the product you are using for configuration. Below are example links to different vendor BGP configuration documentation:
Netography Portal Steps
In Settings > Response Integrations, click Add Integration. Select BGP
Configuration
The following fields are specific to the BGP integration.
Next Hop
yes
12.12.12.12
Neighbors
yes
IPv4/v6 unicast BGP neighbors configured in the Netography Portal.
Communities
yes
One or many BGP communities.
3232:32
Local Preference
yes
Used to choose the exit path for an autonomous system. Default 100
100
Factors
yes
srcip
Expiration
Number of seconds the blocklist will remain active
3600
Max
Limit on number of blocks
1000
Allow List
One or many Allow Lists configured in the Netography Portal, or a List of IP or IP/CIDR addresses
Aggregate
Aggregate IP addresses by mask length
Last updated