Blocklist
Usage
The Blocklist integration can be a vital tool for security and access control within your network. By properly configuring the above fields, administrators can craft specific rules to control access based on various factors such as IP addresses, ensuring that only authorized access is permitted.
Netography Portal Steps
In Settings > Response Integrations, click Add Integration. Select Blocklist`
Configuration
This section provides configuration details specific to the Blocklist integration. The Blocklist integration is designed to manage and control access based on various factors, allowing administrators to set rules for blocking or allowing specific IP addresses or ranges. Here's an explanation of the fields you'll need to configure:
Factors
yes
Specifies the criteria to be considered for the blocklist, such as source IP address.
srcip
Expiration
no
Defines the number of seconds the blocklist will remain active. This helps in temporary blocking if needed.
3600
Max
no
Sets the maximum limit on the number of blocks that can be applied. Useful for controlling resource consumption.
1000
Allow List
no
Specifies one or many Allow Lists configured in the Netography Portal, or a specific list of IPs or IP/CIDR addresses that are exempted from being blocked.
192.168.1.0/24
Aggregate
no
Enables the aggregation of IP addresses by mask length. This can be used to group similar or related IP addresses together for more efficient management.
/24, /32
Last updated